Serving Norfolk and Oxford counties, Rosie Dazzlers Mobile Auto Detailing brings the shine to you. With our convenient and high-quality services, you can experience unparalleled convenience and expertise right at your doorstep. Whether you drive a sedan or an SUV, our team is equipped to make your vehicle dazzle.

At Rosie Dazzlers, we are committed to providing exceptional auto detailing services that will leave your car looking as good as new. We understand that your vehicle is a reflection of your style and personality, which is why we go above and beyond to ensure that it shines with pride.

Our skilled team of professionals uses the latest techniques and premium products to deliver outstanding results. We pay attention to every detail, from thorough exterior cleaning and polishing to meticulous interior detailing. We take pride in our work and treat every vehicle as if it were our own.

When you choose Rosie Dazzlers, you can trust us to make your car shine like never before. Our dedication to excellence and customer satisfaction sets us apart. Don’t settle for anything less than the best. Call now and let your car shine!

Key Takeaways:

• Rosie Dazzlers Mobile Auto Detailing offers convenient and high-quality auto detailing services.
• We specialize in bringing the shine to vehicles, from sedans to SUVs.
• Our skilled team uses premium products and meticulous techniques to ensure outstanding results.
• We treat every vehicle with care and attention to detail.
• Experience unparalleled convenience and expertise with Rosie Dazzlers Mobile Auto Detailing.

Precautions and Instructions for CarPro DLUX Plastic & Wheel Coating

When applying CarPro DLUX Plastic & Wheel Coating, it is important to take certain precautions to ensure a safe and effective application. Here are some key instructions and guidelines to follow:

1. Wear Protective Gloves: Always wear gloves when handling the coating to avoid direct contact with your skin.
2. Avoid Contact with Skin and Eyes: In case of accidental contact, rinse the affected area with plenty of water and seek medical advice if irritation persists.
3. Keep Out of Reach of Children: Store the coating in a secure place, out of the reach of children and pets.
4. Allow Adequate Curing Time: After applying the coating, it is crucial to let it cure for 1-3 hours without introducing any water to the surface. This will ensure proper bonding and durability.
5. Cleaning the Coated Surface: Once the curing time has passed, you can safely wash the coated surface using regular car washes.
6. Intended Use Only: It is essential to use CarPro DLUX Plastic & Wheel Coating only for its intended purpose. Avoid using it on surfaces other than wheels, plastic, and rubber trim.
7. Avoid Exposure to Heat: Store the coating away from direct sunlight and heat sources to prevent damage or degradation.
8. Do Not Ingest: The coating is not meant to be ingested and should be kept away from food and drinks.

By following these precautions and instructions, you can ensure a safe and successful application of CarPro DLUX Plastic & Wheel Coating, providing long-lasting protection and enhancing the appearance of your vehicle’s wheels, plastic surfaces, and rubber trim.

Testimonial

“I’ve been using CarPro DLUX Plastic & Wheel Coating on my car for over a year now, and I couldn’t be happier with the results. The coating has provided excellent protection against dirt, UV rays, and even harsh winter conditions. It’s easy to apply and gives my wheels and plastic trims a glossy, showroom-like finish. Highly recommended!”

– John, Car Enthusiast

Applying CarPro DLUX Plastic & Wheel Coating is a straightforward and effective process that will provide long-lasting protection to your vehicle’s plastic surfaces. Follow our step-by-step guide below to ensure a successful application.

Preparation

1. Start by thoroughly cleaning the surface with an all-purpose cleaner to remove any dirt or debris.
2. Wipe down the surface with CarPro Eraser to ensure it is free from any residues.
3. Allow the surface to evaporate for 20 minutes before proceeding with the application.

Application Steps

• Textured Trim: Apply the coating evenly onto the textured trim without wiping it off. Make sure to fill in all the crevices and grooves for complete coverage.
• Smooth Plastic Surfaces: Apply a small amount of the coating onto a wet applicator and spread it evenly over the surface. Work in small, even areas to ensure an even coat.

It’s important to note that for smooth plastic surfaces, the coating should be wiped off before it becomes too sticky. This ensures an optimal bond and a smooth, glossy finish.

Work on one area at a time, applying the coating within the first minute. This will allow enough time for the coating to bond with the surface. Once the first area is complete, move on to the next overlapping area.

By following these simple steps, you can achieve optimal results when applying CarPro DLUX Plastic & Wheel Coating. Enjoy the long-lasting protection and enhanced appearance it provides for your vehicle’s plastic surfaces!

Tips for Applying CarPro DLUX Plastic & Wheel Coating on Wheels

When it comes to applying CarPro DLUX Plastic & Wheel Coating on wheels, it’s essential to follow a few key tips for optimal results. Here’s our expert advice:

1. Perform a Full Decontamination

Before applying CarPro DLUX, it’s crucial to thoroughly decontaminate the wheels. Start by rinsing them to remove any loose dirt or debris. Then, wash the wheels with soap and water, ensuring all surfaces are clean. For effective iron decontamination, use a wheel cleaner specifically designed for this purpose. Finally, consider clay barring or using a Nanoskin to remove any remaining contaminants.

2. Remove Surface Contaminants

Prior to applying CarPro DLUX, it’s important to eliminate surface contaminants from the wheel. Wipe the wheel down with a solution of isopropyl alcohol (IPA) and water or use CarPro Eraser to ensure a clean surface. This step will help the coating adhere properly and provide long-lasting protection.

3. Apply the Coating

When applying CarPro DLUX, use a microfiber applicator to ensure even distribution of the coating. Work in small sections, applying the coating in thin, even layers. Follow the recommended cure times provided by CarPro, and wipe off any excess coating accordingly.

4. Clean Tires and Apply Tire Dressing

While the wheel is off the car, take the opportunity to clean the tires as well. Use a suitable tire cleaner to remove dirt and grime, and then apply a high-quality tire dressing for a shiny, well-maintained look.

By following these tips, you’ll achieve excellent results when applying CarPro DLUX Plastic & Wheel Coating to your wheels. Remember to always refer to the specific instructions provided by CarPro for the best outcome.

Conclusion

CarPro DLUX Plastic & Wheel Coating is the ultimate solution for enhancing and protecting your vehicle’s wheels, plastic surfaces, and rubber trim. With its versatile and durable composition, this coating provides long-lasting protection that can withstand extreme temperatures. By following the proper application process and taking necessary precautions, you can achieve a glossy finish and hydrophobic protection that lasts.

When applying CarPro DLUX, it is crucial to pay attention to detail and work in small, even areas. Follow the step-by-step instructions and guidelines provided in our CarPro DLUX application tutorial to ensure a seamless coating application. Whether it’s your wheels, plastic surfaces, or rubber trim, CarPro DLUX offers superior protection against environmental contaminants and UV rays.

Rosie Dazzlers Mobile Auto Detailing, in collaboration with www.rosiedazzlers.ca, recommends CarPro DLUX Plastic & Wheel Coating as the ideal solution to protect and enhance your vehicle. With its high silica content and unique nano composition, CarPro DLUX ensures that your vehicle’s surfaces stay protected, glossy, and resistant to water and dirt. Trust the experts and give your vehicle the long-lasting protection it deserves with CarPro DLUX Plastic & Wheel Coating.

Source Links

• https://carpro.global/wp-content/uploads/2020/05/CarPro_DLUX_Instruction.pdf
• https://hqcarcare.com/blogs/blog/carpro-dlux-product-review-and-application-guide
• https://www.carpro-us.com/wheels-trim/cquartz-dlux-trim-wheel-coating-30ml/